HP R5000 User Manual

Specifications 52
Feature Specification
Surge suppression
High-energy 6500 A peak
Noise filtering
MOVs and line filter for normal and common mode
use
Battery specifications
Feature Specification
Type
Each model contains maintenance-free, sealed, valve
regulated lead-acid batteries with an 8-year minimum float
service life at 25°C (77°F).
Voltage
The battery modules have a battery string voltage of 216 V.
Charging
Complete charge takes no more than 48 hours.
Approximately 3 hours to 80 percent capacity at default
nominal utility voltage and no load.
Average battery runtime
Average battery runtimes are approximate and vary depending on connected equipment, configuration,
battery age, temperature, and so on. These estimates are based on the batteries at beginning of life.
Load % Estimated
battery runtime
(minutes)
Runtime with
one ERM
(minutes)
Runtime with
four ERMs
(minutes)*
20
44 123 436
50
16
44
145
80
7 25 83
100
5.7 20 64
* NA/JPN model only
Minimum battery runtime
Minimum battery runtimes are at beginning of life.
Load % Internal battery
runtime
(minutes)
Runtime with
one ERM
(minutes)
Runtime with
four ERMs
(minutes)*
20
36
100
360
50
12 36 115
80
6 23 80
100
5 18 58
* NA/JPN model only

HP R5000 Specifications

General

Output Voltage	230V
Form Factor	Rack-mountable
Rack Height	3U
Nominal Output Voltage	230V
Topology	Double Conversion Online
Input Voltage	230V
Frequency	50/60 Hz
Battery Recharge Time	3 hours
Transfer Time	0 ms
Operating Temperature	0 - 40 °C
Battery Type	Sealed Lead Acid (SLA)
Interface	USB, Serial
Output Power Capacity	4500 Watts
Efficiency	95%
Power Capacity	5000 VA
Dimensions	43.2 x 66 x 13 cm