HP StorageWorks 12000 - Virtual Library System EVA Gateway - Destroying Cartridges

NOTE:
You cannot destroy a tape drive that is currently being used by a backup application.
To destroy a tape drive:
1. Open a Command View VLS session and log in as the administrator. See
“Opening a Command View VLS Session from a Web Browser” on page 105.
2. Click the System tab.
3. Select the tape drive in the navigation tree.
The tape drive details window opens.
4. Click Destroy Tape Drive in the task bar.
5. Click Yes to confirm.
6. Click Finish.
Destroying Cartridges
CAUTION:
If you want to keep data that is currently on a cartridge that you are going to delete, copy the data
to another cartridge using a backup application before performing this task.
NOTE:
You cannot destroy a cartridge that is currently being accessed by a backup application.
To destroy cartridges:
1. Open a Command View VLS session and log in as the administrator. See
“Opening a Command View VLS Session from a Web Browser” on page 105.
2. Click the System tab.
HP StorageWorks 139