HP StorageWorks 12000 - Virtual Library System EVA Gateway - Management Commands; CLI Management Commands

Management Commands
Use the CLI commands in CLI Management commands to:
• Change the account passwords
• Manage cartridges
• Restart the VLS device emulations
• Save configuration settings
• Restore configuration settings
Table 7 CLI management commands
Usage
1
Command
Resets the administrative password, or changes the administrative or user password.
Command View VLS automatically restarts after changing the passwords to make
the changes take effect. Where the options are:
-admin - Reset the administrator password ( -u and -p are ignored) (optional)
-p - Password (no spaces) (optional)
-u - Username (administrator or user). Default is current user. (optional)
-h - Displays command usage information (optional)
changePassword
Changes parameters on an existing cartridge. Where the options are:
-a <s> - VLS filename of the cartridge (required)
-b <s> - Barcode label of the cartridge (required)
-c <n> - Current capacity of the cartridge in gigabytes (optional). Only required
if changing the cartridge capacity.
-l <s> - Name of library in which the cartridge resides (Library_0, ...) (required)
-nc <n> - Desired new capacity of the cartridge in gigabytes (optional)
-nl <s> - Name of the new library if moving cartridge (Library_1, ..) (optional)
-s<s> - Storage LUN name (SLun_#) (required)
-w - Write protect? (0-read/write or 1-read only) (optional)
-y <n> - Cartridge emulation type (2, 3, ...) (required)
-h - Displays command usage information (optional)
editCartridge
Restarts the VLS device emulations.
restartEmulations
Restarts Command View VLS.
restartCommand-
ViewVLS
Shuts down and restarts the VLS node.
restartSystem
Shuts down the VLS node so it can be powered off.
shutdownSystem
Shuts down the VLS node so it can be powered off.
shutdownNode
Where the options are:
-o <s> - Saves the VLS virtual library configuration and network settings to the
specified external configuration file.
-h - Displays command usage information (optional)
saveAllConfig
HP StorageWorks 179