HP StorageWorks 12000 - Virtual Library System EVA Gateway - Replacing a Primary Node; Installing the Node FBDIMM

NOTE:
FBDIMMs do not seat fully if turned the wrong way.
When replacing a FBDIMM, align the FBDIMM with the slot and insert the FBDIMM firmly (1), pressing
down until the FBDIMM snaps into place. When fully seated, the FBDIMM slot latches (2) lock into
place.
Figure 67 Installing the node FBDIMM
.
Replacing a Primary Node
CAUTION:
Each VLS12000 node weighs 17.9 kg (39.5 lb) full. At least two people are required to lift and move
each node.
To replace a primary node:
HP StorageWorks 209