that identifies the number of cartridges that have not successfully mirrored within the threshold
time.
Cartridges in this category can also be listed in the following categories: Mirror Failed, Pending,
Mirror Active, In Use/Deduplicating, and Waiting for Policy Window. This category displays a
green (no cartridges in this category) or red (one or more cartridges in this category) icon.
• Mirror failed — corrective action needed — contains cartridges for which the copy to the mirror
has failed. This category displays a green (no cartridges in this category) or red (one or more
cartridges in this category ) icon.
• In Use/Deduplicating — contains cartridges that are currently being used by the system.
• Pending — contains cartridges that are ready for copy but have not started, for example because
the system does not have enough resources available.
• Waiting for policy window — contains cartridges that are waiting for the policy window to open
for replication to begin.
• Mirror Active — contains cartridges that are currently copying to the mirror.
• Mirror Complete — contains cartridges that have completed copying to the mirror.
• Waiting for first backup — contains cartridges that do not yet have a stored backup.
• Initializing — contains cartridges that are currently initializing.
Target Copy Pool Summary:
• Mirror Active — contains cartridges that are currently copying to the mirror.
• Mirror Complete — contains cartridges that have completed copying to the mirror.
Select a particular category to view the list of cartridges that it contains. The summary screen for the
category displays the cartridge barcodes and other information such as the local library and destination
library for each cartridge. Use the Group By list to filter the cartridge list. Select a specific barcode
to see the details of that cartridge including the sync time, current physical and logical size, and job
history. You can access the Echo Copy Pool Details screen from here as well.
There are a number of tasks available in the task bar of the summary screens, and the tasks displayed
depend on the specific category you selected.
• Copy Now — see “Copying Outside of the Policy Window” on page 74.
• Non Deduplicated Copy — see
“Copying the Whole Cartridge Outside of the Policy Window” on page 81.
• Refresh — refreshes the current screen.
• Restart Broken Mirror — see “Restarting a Broken Mirror” on page 62.
• Restore Media — see “Restoring from a LAN/WAN Virtual Cartridge” on page 61.
Configuring the Cartridge Summary
To configure the cartridge summary:
1. Select the Automigration/Replication tab. The Summary of All Cartridges Managed by
Automigration/Replication screen opens.
2. From the task bar, select Edit Configuration.
3. Enter the time you want the system to check for cartridges not migrated within the copy pools
threshold limit. Use the HH:MM format, then select AM or PM from the list. Each day, at the
specified time, if one or more cartridges have not migrated within the threshold limit, the system
sends a notification that indicates the number of cartridges that have not migrated in time.
4. Check the Send Notification box if you want a notification when cartridges are not migrated in
the copy pools threshold limit. (Uncheck to cancel notifications.)
HP StorageWorks 87
To Next Page
Loading...
