3. Click Edit Email Settings in the task bar.
The Edit Email Settings window opens (Figure 50).
Figure 50 Edit Email Settings window
.
4. To add an email address:
a. Enter an email address in the Email Address box.
b. Select the type of notification alerts to send in the Alerts box.
• All—Sends all notifications
• Errors—Sends only errors
• Warnings—Sends only warnings
• None—Sends no notifications
c. Select a notification alert format in the Format box.
• Short—Sends short mail messages
• Long—Sends detailed mail messages
• Long + Attachment—Sends detailed mail messages and relevant log files
• Configuration—Saves the VLS configuration and emails it at midnight after any configur-
ation change.
d. Click Add.
e. To add another email address, repeat these steps.
5. To delete an email address, click the Remove button for the email address.
6. To test an email address entry, click Test Email.
If the test message is not received at the email address, check the email server settings.
SNMP Notification
To receive VLS notification alerts on a management consoles, you must edit the SNMP settings to
specify the management consoles you want to receive VLS SNMP traps.
HP StorageWorks 155
To Next Page
Loading...
