What does 'Port number invalid' mean on HP StorageWorks P9000 Storage?
If you receive a 'Port number invalid' error, it means that the specified port number is invalid or the cable is not connected to the specified port. Delete the failed path. Check the specified port number or the cable connection and then retry.
What does 'PSUE, by RCU' mean in HP StorageWorks P9000 Storage?
The 'PSUE, by RCU' message indicates that the primary storage system suspended a pair because it detected an error condition at the secondary storage system. Clear the error condition at the secondary storage system or S-VOL. If you need to access the S-VOL, release the pair from the primary storage system. If data in the S-VOL has been changed, release the pair from the primary storage system and then recreate the pair using the Paircreate dialog box. If data in the S-VOL has not been changed, restore the pair from the primary storage system.
What does 'PSUE, S-VOL Failure' mean for HP StorageWorks P9000?
The message 'PSUE, S-VOL Failure' means the primary storage system detected an error during communication with the secondary storage system or detected an I/O error during update copy. Clear any error conditions at the secondary storage system and the S-VOL. If you need to access the S-VOL, release the pair from the secondary storage system. If data in the S-VOL has been changed, release the pair from the primary storage system and then recreate the pair by using the Paircreate dialog box. If data in the S-VOL has not been changed, restore the pair from the primary storage system.
What to do if HP Storage reports 'Program Error'?
If a 'Program Error' is detected, delete the path by using the Delete Path or Delete DKC command, and then add the path and the secondary system again by using the Add Path or Add DKC command.
How to resolve 'Communication error' on HP StorageWorks P9000?
If a 'Communication error' occurs, which means a timeout error happened in the path between the primary and secondary systems, delete the failed path and retry.
What does 'This path was not established' mean on HP Storage?
If you see the message 'This path was not established', delete the failed path. You may need to change the minimum paths setting or delete the secondary system in order to delete the path. After deletion finishes, add the path and the secondary system by using the Add Path or Add DKC command.
How does a planned power outage affect HP StorageWorks P9000 Storage?
If Cnt Ac-J pairs were temporarily suspended due to a planned power outage to the primary system, no recovery procedure is required. The primary system automatically removes the suspension condition when the system is powered on.
What does 'PSUE, MCU IMPL' mean for HP Storage?
The error 'PSUE, MCU IMPL' indicates that the primary storage system couldn't find valid control information in its nonvolatile memory during the IMPL procedure. Restore the pair (pairresync) from the primary storage system. The primary storage system performs an initial copy operation in response to the pairresync request, so that the entire P-VOL is copied to the S-VOL.
What does 'PSUE, Initial Copy Failed' mean on HP Storage?
If you encounter 'PSUE, Initial Copy Failed', it means the primary storage system suspended this pair during the initial copy operation. Release the pair from the primary storage system. Clear all error conditions at the primary storage system, P-VOL, secondary storage system, and S-VOL. Restart the initial copy operation by using the Paircreate dialog box.
What to do if HP StorageWorks P9000 Storage displays 'In Progress'?
If the status is 'In Progress', it indicates that the processing of the attribute modifying is in progress. Wait until the processing terminating.
General introduction to the Data Exchange Code Converter functionality and its purpose.
Describes the operational flow and components involved in the Data Exchange Code Converter.
Details the process of converting alphanumeric character data, focusing on single-byte codes.
Explains double-byte character conversion, including mixed single and double-byte data.
Covers the conversion of numeric data fields, including process flow.
Lists the necessary hardware, software, and release notes for the Code Converter.
Details the files and their locations provided on the installation media for UNIX.
Step-by-step guide for installing, uninstalling, and upgrading on UNIX systems.
Explains how to input the license key required for Code Converter operation.
Illustrates the user's workflow for performing data conversion operations.
Describes the supported record formats and field positions for data files.
Introduces MTO conversion, including EBCDIC to ASCII and IBM Traditional Chinese to Big5.
Details the specific conversion of alphanumeric fields in MTO.
Introduces OTM conversion, including ASCII to EBCDIC and Big5 to IBM Traditional Chinese.
Explains how to customize the code conversion table for OTM.
Details the conversion of packed decimal numeric data.
Explains the process for converting zoned decimal numeric data.
Provides a high-level overview of the code conversion table customization process.
Describes the syntax rules for defining conversion statements used in customization.
Explains the command syntax for customizing tables on UNIX systems.
Lists and explains common error codes and their meanings.
Details the format and interpretation of messages generated by the ccnv utility.
Provides guidance on what information to gather before contacting HP support.
Lists other relevant HP documents for further information.
Information on how to obtain technical support from HP.
General| RAID Support | RAID 0, 1, 5, 6, 10 |
|---|---|
| Interface | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Model | P9000 |
| Operating System Compatibility | Windows, Linux, VMware, HP-UX |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Drive Interface | SAS, SSD |
| Drive Types Supported | SSD, SAS |
| Redundancy | Redundant controllers, power supplies, and fans |
| Management Software | HP StorageWorks Command View |
To Next Page