HP StorageWorks XP10000

Site requirements 33
Calculating clearances
See Figure 3. The total floor clearance required for the disk array includes:
• The actual space required by the equipment.
• Service clearance — the floor space required to access the disk array.
Never use this space for storage.
• Additional space required to properly distribute the equipment weight
on your computer room’s raised floor. The amount of additional space
required depends on your floor load rating.
Figure 3. Primary rack clearance dimensions
Primary
Rack
Front
Rear
rear
service
clearance
1000 mm
front
service
clearance
1000 mm
ba
c
minimum side
clearance = 100 mm