Delivery and unpacking 57
Caution Any movement of the equipment by forklift should be done prior to
unpacking. The carton assembly provides the most secure support of the
equipment during movement. Transporting the equipment by forklift after
the packaging carton has been removed is not advisable.
Caution Equipment racks are top heavy and contain very sensitive electronic and
mechanical components. When moving on frame casters, the rolling
surface must be able to support the equipment weight and must be free of
surface conditions that could cause shock or vibration to the cabinet
contents. Avoid pushing the racks from behind because they may tip over.
Instead, pull the racks from the front to roll them. Be careful when pulling
the rack that it doesn’t tip toward you or fall on you, causing injury.
Warning
When using sharp objects or cutting tools, make sure that no part of your
body lies in the path of the blade bit or point.
Caution When disk array equipment is not located in a data center or computer
room, it must be stored in a controlled area that meets environmental
requirements ((page 39).
To Next Page
Loading...
