HP StoreEasy 1000

Figure 2 StoreEasy 1450 Storage front panel LEDs and buttons
StatusDescriptionItem
Blue = Identification is activatedUID LED/button1
Flashing blue = System is being managed remotely
Off = Identification is deactivated
Green = System is onPower On/Standby button and system
power LED
2
Flashing green = Waiting for power
Amber = System is in standby, but power is still applied
Off = Power cord is not attached or power supply failed
Green = System is on and system health is normalHealth LED3
Flashing amber = System health is degraded
Flashing red = System health is critical
Off = System is off.
Green = Linked to networkNIC status LED4
Flashing green = Network activity
Off = No network link
Figure 3 StoreEasy 1450 Storage rear panel components
2. PCIe3 slot 2 (primary, associated with processor 1)1. PCIe3 slot 1 (primary, associated with processor 1)
4. Power supply 1 bay3. PCIe3 slot 3 (secondary, associated with processor 2)
6. Power supply 1 LED (optional)5. Power supply 1 power connector (optional)
8 HPE StoreEasy 1000 Storage