A Operating system logical drives
The logical disks reside on physical drives as shown in Table 11 (page 179).
IMPORTANT: The first two logical drives are configured for the HPE StoreEasy 1000 Storage
system operating system.
The Operating System volume default factory settings can be customized after the operating
system is up and running. The OS logical drive size can be changed to 120 GB or higher.
If the Operating System volume is customized and the System Recovery DVD is run at a later
time, the System Recovery process will maintain the custom settings as long as the above criteria
are met (OS logical drive size of 120 GB or higher) and the OS volume is labeled System. If the
storage system arrays are deleted and the System Recovery DVD is run, the System Recovery
process will configure the HPE StoreEasy 1000 Storage using the factory default settings listed
in Table 11 (page 179).
HPE StoreEasy 1000 Storage systems do not include preconfigured data volumes. The
administrator must configure data storage for HPE StoreEasy 1000 Storage.
The system reserved partition contains the operating system boot loader and allows you to enable
BitLocker Drive Encryption for the Operating System volume.
Table 11 HPE StoreEasy 1000 Storage RAID configurations
Logical Disk 1Server model
• Operating System Volume (100 GB)• StoreEasy 14x0 Storage (base model)
• •StoreEasy 14x0 4TB SATA Storage RAID 6
•• Physical Drives 1–4StoreEasy 14x0 8TB SATA Storage
• StoreEasy 14x0 16TB SATA Storage
• Operating System Volume (120 GB)• StoreEasy 15x0 Storage (base model)
• •StoreEasy 15x0 4TB SATA Storage RAID 6
•• Physical Drives 1–4StoreEasy 15x0 8TB SATA Storage
• StoreEasy 15x0 16TB SATA Storage
• Operating System Volume (120 GB)• StoreEasy 16x0 Storage (base model)
• •StoreEasy 16x0 16TB SAS Storage RAID 1
•• Physical Drives 25–26StoreEasy 16x0 32TB SAS Storage
• StoreEasy 16x0 48TB SAS Storage
• Operating System Volume (120 GB)• StoreEasy 1650 Expanded Storage (base model)
• •StoreEasy 1650 Expanded 32TB SAS Storage RAID 1
•• M.2 Physical SSDs 9 and 10 bays Installed in PCIe
slot 2
StoreEasy 1650 Expanded 48TB SAS Storage
• StoreEasy 1650 Expanded 64TB SAS Storage
• Operating System Volume (120 GB)• StoreEasy 18x0 Storage (base model)
• •StoreEasy 18x0 9.6TB SAS Storage RAID 1
•• Physical Drives 25–26StoreEasy 18x0 14.4TB SAS Storage
NOTE: In the HP Smart Storage Administrator, mapping of logical disks begins at 1. In Microsoft
Disk Manager, mapping begins at 0.
If the operating system has a failure that might result from corrupt system files, a corrupt registry,
or the system hangs during boot, see “Recovering HPE StoreEasy 1000 Storage” (page 169).
179
To Next Page
Loading...
