HP StoreEasy 1000

To redirect shadow copies to an alternate volume:
1. Access Disk Management.
2. Select the volume or logical drive, then right-click on it.
3. Select Properties.
4. Select the Shadow Copies tab.
5. Select the volume that you want to redirect shadow copies from and ensure that shadow
copies are disabled on that volume; if enabled, click Disable.
6. Click Settings.
7. In the Located on this volume field, select an available alternate volume from the list.
NOTE: To change the default shadow copy schedule settings, click Schedule.
8. Click OK.
9. On the Shadow Copies tab, ensure that the volume is selected, and then click Enable.
Shadow copies are now scheduled to be made on the alternate volume.
Disabling shadow copies
When shadow copies are disabled on a volume, all existing shadow copies on the volume are
deleted as well as the schedule for making new shadow copies.
CAUTION: When the Shadow Copies Service is disabled, all shadow copies on the selected
volumes are deleted. Once deleted, shadow copies cannot be restored.
Managing shadow copies from the HPE StoreEasy 1000 Storage system desktop
The HPE StoreEasy 1000 Storage desktop can be accessed by using Remote Desktop to manage
shadow copies.
1. Select Start→Computer.
2. Right-click the volume name, and select Properties.
Volume shadow copies 131