Table 4 Controller, disk enclosure, and single/dual domain support (continued)
Dual domain support
Single domain
support
Disk enclosure
supported
Supported in
StoreEasy
systems
Controller
model
NYD6000
D6020
YYD2000, D3000,
D6020, D6000
1450, 1550, 1650,
1650E, 1850
P841
NOTE:
• The StoreEasy 1450 and 1550 systems come standard with a Smart Array P440 storage
controller. The StoreEasy 1650 and 1850 come standard with a Smart Array P440ar storage
controller. These storage controllers are used to connect to the internal disk drives, including
the OS drives.
• The HPE StoreEasy 1650 Expanded system comes standard with two controllers, P840ar
and B140i. The B140i is connected to the operating system drives and supports only SATA
drives. The P840ar controller is connected to the 28 storage drives.
• Optional P441 and P841 Smart Array controllers are used for connecting to external D2000,
D3000, or D6000/D6020 disk enclosures.
I/O modules
The StoreEasy systems connect to the I/O modules on the D6000/D6020 and D2000/D3000 disk
enclosures. Figure 23 (page 37) shows the I/O module ports on the D2600 disk enclosure,
Figure 24 (page 38) shows the I/O module ports on the D2700 disk enclosure, and Figure 25 (page
38) shows the I/O module ports on the D6000 disk enclosure.
Figure 23 D3600 Disk Enclosure I/O module ports
1. Port 1
2. Port 2
3. I/O module A
4. I/O module B
Cabling HPE StoreEasy 1000 Storage 37
To Next Page
Loading...
