EasyManua.ls Logo

HP StoreEasy 1000

HP StoreEasy 1000
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The <UserDetails> sub-element defines Windows user details for node to node communication.
<UserName> specifies the Windows user name that is created on all cluster nodes for node
to node communication.
<Password> specifies the password for the Windows user created by the dashboard for
node to node communication.
IMPORTANT: If you enter a value that is lower than the minimum required value in the
dashboard configuration file, the StoreEasy Dashboard discards the new value and considers
the default value to update and display the data.
Notification System
The Notification System feature enables you to set email alerts for various system parameters,
such as free space, unallocated space, and used space. The email alerts are sent at a scheduled
time based on the rules and notification parameters that you specify. For example, if you set the
value of the Used Space parameter as 100 MB, an email alert is sent when the used space in
the system reaches 100 MB.
NOTE: The email alerts are sent as per the storage of the whole system (not specific to any
drive).
You can access the Notification System dialog box using the following methods:
Double-click the StoreEasy Notification System icon on the desktop.
Open Server Manager, click ToolsStoreEasy and select Notification System from the
menu.
Click Notification System on the Start screen.
To set an email alert:
1. In the Contact Information group, enter the full name, email address to and from which the
alert must be sent, and SMTP server name.
2. Click Test for the SMTP server validation. This step is optional.
NOTE: If the validation is successful, an email is sent to the specified email address and
a confirmation message is displayed on the screen. If the validation fails, a message is
displayed indicating that you must verify the SMTP server details.
3. In the Notification Parameters group, select a parameter and comparison, and then enter
a value that should be compared against the parameter value. When you select the Notify
Daily check box, an email notification is sent daily. When you clear the Notify Daily check
box, an email notification is sent only once. However, an email notification is sent if there is
a change in the notification rule.
ValueComparisonParameter
100 MB is equal to Free Space
Unallocated Space 100 MiBis not equal to
is less thanUsed Space 5%
only for "freespace"
is less than or equal to
is greater than
is greater than or equal to
110 Managing HPE StoreEasy 1000 Storage

Table of Contents

Other manuals for HP StoreEasy 1000

Related product manuals