HP StoreEver MSL4048 - Page 168

Table 32 Robotic error sub-codes (continued)
DescriptionSub-code
Source location empty.4C
Could not pull tape out of slot.4D
Unexpected tape on elevator, possible inventory lost.4E
Preposition to drive failed50
Elevator
3
movement to home sensor failed51
Sled
5
movement to home sensor failed52
Error during sled
5
movement to drive position53
Error during rotation
4
to drive position54
Error during elevator
3
movement in drive position55
Error during sled
5
movement to rotation position.56
Error during rotation to end position.57
Move from/to drive failed60
Error during first slider
2
movement61
Error during first gripper
1
movement62
Error during second slider
2
movement63
Error during second gripper
1
movement, get range failed64
Error during third slider
2
movement, move home failed65
Release magazine failed70
Error during sled
5
movement to rotation
4
position71
Error during rotation
4
to unlock position72
Error during move sled
5
to block73
Opening mailslot failed80
Error during movement to mailslot open position81
Error during moving back, sensor was found82
Movement to home position failed90
Elevator
3
movement to home position failed91
Error during sled
5
movement to rotation
4
position92
Error during rotation
4
to home or far position93
Sled
5
movement to home sensor position failed94
Sled
5
movement to transport position failed95
Error during rotation movement to rotation minimum position99
Movement to mailslot failedA0
Sled
5
movement to sensor failedA1
Sled
5
movement to rotation
4
position failedA2
168 Troubleshooting