EasyManuals Logo

HP TouchSmart 9300 Elite User Manual

HP TouchSmart 9300 Elite
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Table A-1 Numeric Codes and Text Messages (continued)
Control panel message Description Recommended action
2202-PMM Deallocation Error during MEBx
cleanup
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the system
board.
2211-Memory not configured correctly for
proper MEBx execution
SODIMM1 is not installed. Make sure there is a memory module in the
SODIMM1 socket and that it is properly
seated.
2212-USB Key Provisioning failure writing to
device
USB device used for USB key provisioning
will not allow BIOS to update provision file
properly.
1. Try a different USB key device for
provisioning.
2. If the error persists, update to the latest
BIOS version and ME firmware
version.
3. If the error still persists, replace the
system board.
2217-ME Firmware Version request failure ME firmware is not properly responding to
BIOS query for version information.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version and ME firmware
version.
3. If the error still persists, replace the
system board.
2218-ME Firmware Version should be
updated
ME firmware must be updated to match
current functionality contained in the system
BIOS.
1. Update to the latest ME firmware
version.
2. If the error persists and system BIOS
has been recently updated, restore
previous system BIOS version.
3. If the error still persists, replace the
system board.
2219-USB Key Provisioning file has invalid
header identifier
Provisioning file contained on the USB key
has been corrupted or is not a valid version
for the current ME firmware.
1. Recreate the provisioning file using
third party management console
software.
2. If the error persists and system BIOS
has been recently updated, restore
previous system BIOS version.
Otherwise, update the ME firmware
version.
3. If the error still persists, replace the
system board.
106 Appendix A POST Error Messages

Table of Contents

Other manuals for HP TouchSmart 9300 Elite

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP TouchSmart 9300 Elite and is the answer not in the manual?

HP TouchSmart 9300 Elite Specifications

General IconGeneral
RAMUp to 16 GB DDR3 SDRAM
Operating SystemWindows 7 Professional
TouchscreenYes
ProcessorIntel Core i5 or i7
Display23-inch diagonal widescreen LCD with LED backlight
StorageUp to 1 TB Hard Disk Drive or Solid State Drive
GraphicsIntel HD Graphics
Optical DriveDVD+/-RW SuperMulti DL
ChipsetIntel Q67 Express
AudioIntegrated high-definition audio
WebcamIntegrated 2 MP webcam
PortsUSB 2.0, RJ-45, audio in/out
NetworkingGigabit Ethernet, Wi-Fi

Related product manuals