HP u818x kit - Connecting to Power; LED Indicator

16
2.5 Connecting to Power
Use only the supplied car charger to power up the camcorder.
1. Connect one end of the car charger to the USB connector of the camcorder.
USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter socket of your
vehicle. Once the vehicle engine is started, the camcorder automatically
powers on. Car charger input: DC 12 / 24V.
2.6 LED Indicator
Status Explanation LED Indicator Color
Power on, standby Green
Recording/ Recording
and screen off
Flash red