HP u818x kit - Speed Cam Alert

24
3.6.1 Speed Cam Alert
If the Speed Cam Alert function is enabled, once your car’s location is determined
by GPS and approaches a speed cam, this product produces audible alert and
screen message.
To enable the Speed Cam Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Cam Alert, and then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button to return recording screen.
5. The alarm screen turns red to remind you to slow down if you are driving
faster than the speed limit.
Note:
The speed cam alert function must have the speed cam datum from the country you use. The function will be void
if the product is used in any other countries. Please consult with the shop you purchased if the function is void.
There is no guarantee the speed cam datum will be included for the worldwide countries.