HP u818x kit - Adjusting the Settings; Using the Menu

44
6 Adjusting the Settings
6.1 Using the Menu
You can customize the general settings via the on-screen display (OSD) menus.
1. Press the button to enter the OSD menu.
2. Press the / button to select menu item, and then press the
OK
button for entering function menu.
3. Press the / button to select or adjust the value, and then press
the
OK
button to confirm setting.
4. Press the button to return recording screen.
6.2 Menu Items
Refer to the below table for details of main menu and function list.
Menu option Description Available option
Playback Select the file category that you want to view.
Video
Emergency
Picture
Satellite Status
Displays the current state of the satellite
reception.
Wi-Fi Set up Wi-Fi linkage of a mobile phone. On / Off
Speed Unit The system displays the speed setting unit. KM/H / MPH
Speed Cam
Alert
If the Speed Cam Alert function is enabled, once
your car’s location is determined by GPS and
approaches a speed cam, this product produces
audible alert and screen message.
On / Off
Speed Position
Management
Delete Last Position:
Delete the last speed
camera point.
Delete All Position:
Delete all speed camera point.
Delete Last Position / Delete
All Position
Speed Limit
Alert
Set a customized maximum speed limit. When
the vehicle speed exceeds the maximum, an
audible alert is automatically triggered and a
warning message is displayed on the screen.
Press the / button to
set the speed limit. You can
set the off, or set speed limit
from 50 to 200km/h (30 to
125mph)
Set Time Zone Set the time zone you are in.
Press the / button to
set the satellite time. You may
customize it between GMT
-12:00 ~ GMT +14:00