EasyManua.ls Logo

HP u818x kit - FCWS

HP u818x kit
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
3.6.5 FCWS
Once your car’s location is determined by GPS and the FCWS function is enabled,
this camcorder produces audible alert and screen message when you drive at
speeds over 60 km/h (37 mph) and are less than 20 m away from the car in front
of you. If the camcorder not completes the satellite positioning, and the leading
vehicle distance below 20 meters, it will also produce a warning screen and beep
reminder.
To set the FCWS (Forward Collision Warning System), do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select FCWS, and then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button to return recording screen.
5. After enabling LCWS, the screen will display traffic lane align icon ,
please adjust the camcorder so that the horizontal line and the eye level are
overlapped and the slash lines are centered in the driving lane.
6. This product produces audible alert and screen message when FCWS is
activates.

Table of Contents

Other manuals for HP u818x kit

Related product manuals