HP u818x kit - Driver Fatigue Alert; LDWS

26
3.6.3 Driver Fatigue Alert
If the Driver Fatigue Alert function is enabled, this product produces audible
alert and screen message one hour after it has begun recording and repeats the
alerts every half hour afterwards.
To enable the Driver Fatigue Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Driver Fatigue Alert, and then press
the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button return to recording screen.
5. This product produces audible alert and screen message when Driver
Fatigue Alert activates.
3.6.4 LDWS
Once your car’s location is determined by GPS and the LDWS function is enabled,
this camcorder produces audible alert and screen message when you drive off of
or change lanes at speeds over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems), do the following:
1. Press the
button to enter the OSD menu.
2. Press the / button to select LDWS, and then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button to return to recording screen.