25
3.6.2 Speed Limit Alert
If the Speed Limit Alert function is enabled, this product produces audible alert
and screen message once your car’s location is determined by GPS and its running
speed exceeds the set limit.
To set the Speed Limit Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Limit Alert, and then press the
OK
button for entering function menu.
3. Press the / button to set up a Speed Limit Alert to trigger this
product’s alarm [Off / 50 ~ 200 km/h (30~125 mph)], and then press the
OK
button to complete setting.
4. Press the button to return recording screen.
5. The screen pops up red icon to remind you to slow down when you are
driving faster than the set speed limit.
To Next Page
Loading...
