18
2.8 Initial Settings
Before using the camcorder, we recommend you setup the correct Time zone,
Date and Time.
Note:
Please note that if you press the button during recording, the system will stop recording and enter OSD
menu. Make sure the recording is already stopped then continue operating the menu.
2.8.1 Set Time Zone
To set the time zone, do the following:
1.
Press the button to enter the OSD menu.
2.
Press the or button to select
Set Time Zone
, and then press
the button for entering function menu.
3.
Press the or button to set the current time zone, and then
press the button to complete setting.
4.
Press the button to return to recording screen.
Note:
If satellite positioning is not successful, camcorder’s clock will run based on user defined time.
2.8.2 Set the Date / Time
To set the correct date and time, do the following:
1.
Press the button to enter the OSD menu.
2.
Press the or button to select
Date / Time
, and then press the
button for entering function menu.
3.
Press the or button to adjust the value, and then press the
button to set the next field.
4.
Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use over 7 days.
To Next Page
Loading...
