45
Menu option Description Available option
Date / Time Set the date and time.
Press the / button to
adjust the value, and then
press the
OK
button to set
the next field, and complete
setting
Language Language setting.
According to the actual
shipping regions.
Resolution Setting of video resolution.
2560x1440 30fps HDR
1920x1080 60fps HDR
1920x1080 30fps HDR
EV Setting of exposure value.
Press the / button to
set the exposure value. It can
be set between -2 ~ +2
LCD Setting
Set LCD off time or HUD.
Set HUD:
After power on 7 seconds, the screen will be
always in HUD mode. Press button can
exit HUD mode and return to preview scree.
(Recording is not affected when screen is in
HUD mode).
Set off after 7sec or 1min:
Screen will be off after a set time if no
operation is detected during the standby or
record mode. Press any button will switch it on.
(Recording is not affected when screen is off).
On/ Turn off after 7 sec / Turn
off after 1min/ HUD
Voice Record Setting for activating audio in the video. On / Off
Key Tone Enable / disable power-on sound and key tone. On / Off
Volume Adjust the sound volume.
Press the / button to
set the volume. It can be set
between 0 ~ 10.
Record Interval
Save respective video files in a length of the
selected duration.
30 sec. / 1 min. / 3 min.
Parking Mode
If one of parking mode is activated, the
camcorder will enter parking mode 10 seconds
after disconnect the external power.
Off/ Park Recording / Motion
and Collision Detection /
Timelapse
Collision
Detection
If Collision Detection is activated, this
camcorder starts emergency recording once it
detects any collision.
High Sensitivity / Normal
Sensitivity / Low Sensitivity /
Off
Driver Fatigue
Alert
When Driver Fatigue Alert is enabled, audible
alert and screen message will be activated 1
hour after the camcorder is powered on, with a
repetition every 30 minutes.
On / Off
To Next Page
Loading...
