EasyManua.ls Logo

HP xw4200 - Page 41

HP xw4200
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMPUTER SETUP (F10) 41
Chapter 3
Security
(continued)
Restore Master Boot
Record*
Restores the backup Master Boot Record to the current bootable disk.
NOTE: Only appears if all of the following conditions are true:
- MBR Security is enabled.
- A backup copy of the MBR has been previously saved.
- The current bootable disk is the same disk from which the backup copy of the MBR was
saved.
NOTE: Restoring a previously saved MBR after a disk utility or operating system has modified
the MBR might cause the data on the disk to become inaccessible. Only restore a previously
saved MBR if you are confident that the current bootable disk’s MBR has been corrupted or
infected with a virus.
Smarter Allows you to use Smarter authentication for the Pre-Boot process.
Embedded Security
Device
Embedded Security Device
Allows you to activate the Trusted Platform Module.
Setup password must be established before this menu item can be selected.
Reset to Factory Settings
Allows you to clear all encryption keys stored into the Trusted Platform Module.
Setup password must be established before this menu item can be selected.
Device Security SMBUS Controller was added to embedded devices capable of being hidden or available
during a refresh of the BIOS.
Power OS Power Management Allows you to enable PCI Express ASPM support.
Thermal Allows you set the fan idle mode.
*Available on select models.
Table 3-1 Computer Setup Menu (Continued)
Heading Option Description

Table of Contents

Other manuals for HP xw4200

Related product manuals