DESKTOP MANAGEMENT 57
Chapter 3
Deleting a Power-On or Setup Password
To delete a power-on or setup password:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart the
Computer.
2 To delete the Power-On password, go to Step 3.
To delete the Setup Password, wait for the
F10=Setup prompt to appear on the lower right corner of
the screen. Once you see the prompt, press the F10 key to enter the F10 setup utility.
NOTE If you do not press the F10 key at the appropriate time, you must restart the computer and try
again to access the utility.
3 When the key icon appears, enter your current password followed by a slash (/) or alternate delimiter
character as shown:
current password/
4 Press Enter.
NOTE See the “National Keyboard Delimiter Characters” on page 58 section for information about the
alternate delimiter characters. The power-on password and setup password can also be changed using
the Security options in Computer Setup.
To Next Page
Loading...
