64 SYSTEM MANAGEMENT
To disable MBR Security:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart the
Computer.
2 Wait for the
F10=Setup prompt to appear on the lower right corner of the screen. Once you see the
prompt, press the F10 key to enter the F10 setup utility.
NOTE If you do not press F10 key at the appropriate time, you must restart the workstation and try again
to access the utility.
3 Select Security>Master Boot Record Security>Disabled.
4 Before exiting, select File>Save Changes and Exit.
Cable Lock Slot
The rear panel of the chassis can accommodate a cable lock accessory that allows the workstation to be
physically secured to a work area.
For illustrated instructions, see “Cable Lock (Optional)” on page 75.
Padlock (Optional)
Prevents entire system theft and discourages access panel removal.
For illustrated instructions, see “Security Padlock (Optional)” on page 75.
Universal Chassis Clamp Lock (Optional)
The version without a cable discourages access panel removal and prevents theft of IO devices. The
version with a cable also prevents entire system theft and allows multiple systems to be secured with a
single cable.
For illustrated instructions, see “Universal Chassis Clamp Lock (Optional)” on page 76.
Rear Port Controller Cover (Optional)
Locks rear I/O cables to prevent cable theft.
Fingerprint Identification Technology
Eliminating the need to enter user passwords, HP Fingerprint Identification Technology tightens network
security, simplifies the login process, and reduces the costs associated with managing corporate
networks. Affordably priced, it is not just for high-tech, high-security organizations anymore.
Support for Fingerprint Identification Technology varies by model.
For more information, visit http://ht8004.www1,hp.com/products/security
.
To Next Page
Loading...
