72 REMOVAL AND REPLACEMENT
Cables and Connectors
Cables must be handled with care to avoid damage. Apply only the tension required to seat or unseat the
cables during insertion or removal from the connector. Handle cables by the connector whenever
possible. In all cases, avoid bending or twisting the cables, and ensure that the cables are routed in such
a way that they cannot be caught or snagged by parts being removed or replaced.
CAUTION When servicing this workstation, ensure that cables are placed in their proper location during
the reassembly process. Improper cable placement can damage the workstation.
Hard Drives
Handle hard drives as delicate, precision components, avoiding all physical shock and vibration. This
applies to failed drives as well as replacement spares.
If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective
packaging and label the package “Fragile: Handle With Care.”
Do not remove hard drives from the shipping package for storage. Keep hard drives in their protective
packaging until they are actually mounted in the workstation.
Avoid dropping drives from any height onto any surface.
If you are inserting or removing a hard drive, turn off the workstation. Do not remove a hard drive
while the workstation is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,
avoid touching the connector. For more information about preventing electrostatic damage, see
“Electrostatic Discharge Information” on page 68.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields,
such as monitors or speakers.
Lithium Coin Cell Battery
The battery that comes with the workstation provides power to the real-time clock and has a minimum
lifetime of about three years.
For instructions on battery removal and replacement procedures, see “Battery” on page 100.
WARNING! This workstation contains a lithium battery. There is a risk of fire and chemical burn if the
battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose in
water or fire, or expose it to temperatures higher than 140º F (60º C).
CAUTION Do not dispose of batteries, battery packs, and accumulators together with the general
household waste.
Batterij niet
weggooien,
maar inleveren
als KCA.
To Next Page
Loading...
