4. Lift the system board out 2 of the chassis, being careful not to damage the cables and rear panel
connectors.
Figure 4-52 Removing the system board
Replacing the system board
1. Insert the system baord straight down and be sure all system board standoffs engage with the
keyholes in the chassis.
NOTE: Be sure the system board connectors engage correctly with the rear I/O panel.
2. Push back while maintaining downward pressure on the board, so all standoffs remain engaged.
3. Install the heatsink (
Replacing the CPU heatsink on page 92).
Product recycling
HP's Planet Partners recycling service provides an easy way to recycle computer equipment,
rechargeable batteries or HP printing supplies. HP processes ensure that unwanted hardware or empty
HP printing supplies are recycled responsibly.
For information on recycling HP components or products, visit
http://www.hp.com/go/recycle.
ENWW Product recycling 97
To Next Page
Loading...
