HP Xw6400 - Workstation - 4 GB RAM - Cable Lock (Optional); Universal Chassis Clamp Lock (Optional)

Cable lock (optional)
If a cable lock is installed, remove it before servicing the unit. To remove the cable lock, unlock it and
pull it out of the cable lock slot as shown in the following image.
Figure 4-4 Removing the cable lock
Universal chassis clamp lock (optional)
If a universal chassis clamp lock is installed, remove it before servicing the unit.
To remove the lock:
1. Unlock the device and remove the locking mechanism.
62 Chapter 4 Removal and replacement procedures ENWW