Setting the hood sensor protection level
1. Power on or restart the workstation.
2. As soon as the workstation is powered on, press and hold the F10 key until you enter the Computer
Setup (F10) Utility. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press the F10 key at the appropriate time, you must restart the computer
and press and hold the F10 key again to access the utility.
If you are using a PS2 keyboard, you might see a Keyboard Error message—disregard it.
3. Select Security>Smart Cover>Cover Removal Sensor, and follow the onscreen instructions.
4. Before exiting, click File>Save Changes and Exit.
Hood lock (Smart cover lock) (optional)
When installed, the optional hood lock (Smart cover lock) can prevent unauthorized access to the
internal components.
CAUTION: For maximum cover lock security, be sure to establish a setup password. The setup
password prevents unauthorized access to the Computer Setup utility.
Locking the hood lock (Smart cover lock):
1. Power on or restart the workstation.
2. As soon as the workstation is powered on, press and hold the F10 key until you enter Computer
Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press the F10 key at the appropriate time, you must restart the workstation
and press and hold the F10 key again to access the utility.
If you are using a PS2 keyboard, you might see a Keyboard Error message—disregard it.
3. Select Security>Smart Cover>Cover Lock>Lock.
4. Select Fire>Save Changes and Exit.
Unlocking the hood lock (Smart cover lock):
1. Turn on or restart the workstation.
2. As soon as the workstation is powered on, press and hold the F10 key until you enter Computer
Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press the F10 key at the appropriate time, you must restart the workstation
and press and hold the F10 key again to access the utility.
If you are using a PS2 keyboard, you might see a Keyboard Error message—disregard it.
3. Select Security>Smart Cover>Cover Lock>Unlock.
4. Select Fire>Save Changes and Exit.
ENWW Desktop management 47
To Next Page
Loading...
