HP Z27K G3 User Manual

12
2. chenge the length
from 20.75mm to
23.5mm
3. Modify the rear cover
I/O metal and plastic.
USB-A
USB2
USB3
Molex
https://www.digikey.com
PN:
WM10413TR-ND
1.Cut off the Pin as below
USB-A
USB4
USB5
Molex
https://www.digikey.com
PN:
WM10413TR-ND
1.Modify the rear cover
I/O metal and plastic.
2. Change the height
from 15mm to
11.5mm
3.Cut off the Pin as below
NOTE: The connector may need to be modified to meet functionality, regulatory and safety requirements if
it is not an exact match.
You can purchase cables from the HP part store at https://partsurfer.hp.com/Search.aspx.
NOTE: HP continually improves and changes product parts. For complete and current information about
supported parts for your computer, go to http://partsurfer.com, select your country or region, and then
follow the on-screen instructions.
Internal and External Power Supplies are available for purchase from the following EU distributor: EET
https://www.eetgroup.com/en-eu/

HP Z27K G3 Specifications

General

Screen Size	27 inches
Resolution	3840 x 2160 (4K UHD)
Panel Type	IPS
Aspect Ratio	16:9
Brightness	350 cd/m²
Contrast Ratio	1000:1
Refresh Rate	60 Hz
Color Gamut	99% sRGB
Viewing Angle	178° horizontal / 178° vertical
Pixel Pitch	0.1554 mm
Integrated Speakers	No
Tilt	-5° to +20°
VESA Mount	100 x 100 mm
Dynamic Contrast Ratio	10000000:1
Response Time	5 ms (GtG)
Ports	1 x DisplayPort 1.4, 1 x HDMI 2.0, 4 x USB-A 3.2 Gen 1
HDCP Support	Yes
Swivel	±45°
Pivot	90°
Weight (with stand)	7.4 kg
Height Adjustment	150 mm