Figure 83: Physical service processor ports, HPE ProLiant DL120 Gen9 Server
1. Management (MGMT) port; NIC 1
2. Service port; NIC 2
Figure 84: HPE ProLiant DL120 Gen9 Server details
NOTE: For the HPE ProLiant DL120 Gen9 Server, the NIC port 2 is configured for shared mode to either
be configured for use as the Service port or configured for use as an iLO (virtual serial) port.
1. Slot 3 PCIe3 x8 (8, 4, 1); If the GPU riser cage is installed, Slot 3 supports PCIe x16 (16, 8, 4, 1).
2. Slot 2 PCIe3 x8 (8, 4, 1)
3. Slot 3 PCIe3 x16 (16, 8, 4, 1)
4. Non-hot-plug power supply
5. Power supply blank (bay 2 of optional redundant power supply module)
6. Hot-plug power supply (bay 1 of optional redundant power supply module)
7. NIC 2; iLO (virtual serial) port; Service port (Eth1)
8. NIC 1; Management port (Eth0)
More information 107
To Next Page
Loading...
