Connecting to HPE 3PAR Service Processor 5.x from a web browser
Procedure
1. Browse to the HPE 3PAR Service Processor (SP) IP address https://<sp_ip_address>:8443.
2. Enter the account credentials and click Login.
Connecting to the HPE 3PAR Service Processor 4.x from a web browser
Procedure
1. Browse to the HPE 3PAR Service Processor (SP) 4.x IP address or hostname https://
<sp_ip_address> and press Enter.
2. Enter the account credentials and click OK.
Connecting to the Linux console of the HPE 3PAR Service Processor through a Secure
Shell session
Procedure
1. Initiate a Secure Shell (SSH) session from a host, laptop, or other computer connected on the same
network, and then connect to the HPE 3PAR Service Processor (SP) IP address or hostname.
2. Log in to the HPE 3PAR SP software.
Connecting to the Linux console of the HPE 3PAR Service Processor through a VMware
vSphere Client
Procedure
1. From a VMware vSphere client, connect to the Linux console of the HPE 3PAR Service Processor
(SP).
2. Log in to the HPE 3PAR SP software.
Connecting a service laptop to the physical HPE 3PAR Service Processor through the
service port
Procedure
1. Connect an Ethernet cable between the service port on the physical service processor and an
Ethernet port on a service laptop.
2. Temporarily configure the LAN connection of the laptop as follows:
a. IP Address: 10.255.155.49
b. Subnet mask: 255.255.255.248
3. Log in to the HPE 3PAR Service Processor software. In a browser window, enter: https://
10.255.155.54:8443/.
More information 69
To Next Page
Loading...
