LED Function Status State
3
Drive status Amber solid Fault—An issue exists with one or more drives
within the enclosure. To determine the affected
drives, inspect the LEDs on each drive.
This LED applies only to drives.
Off No fault
Figure 113: System status LEDs, left bezel ear cap, LFF enclosures front view
Table 42: System status LEDs, left bezel ear cap, LFF enclosures front view
LED Function Status State
1
System power Green solid Power
Off No power
System standby Amber solid Enclosure powered by the battery
2
Module fault Amber solid Fault
Off No fault
3
Drive status Amber solid Fault—An issue exists with one or more drives
within the enclosure. To determine the affected
drives, inspect the LEDs on each drive.
This LED applies only to drives.
Off No fault
Controller node rescue
Each controller node has a built-in node rescue network that connects the controller nodes in the system
together in a cluster through fixed physical Ethernet connections through the backplane of the controller
node enclosure (chassis). This connection in a cluster allows for a rescue to occur between an active
More information 131
To Next Page
Loading...
