Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
Figure 110: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server rear view
Table 39: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
rear view
LED function Status State
1
UID LED Blue solid Identification is activated.
Blue flashing System is being managed remotely.
Off Identification is deactivated.
2R
iLO 5/Standard NIC
activity LED
Green solid Activity exists.
Green
flashing
Activity exists.
Off No activity exists.
2L
iLO 5/Standard NIC
link LED
Green solid Link exists.
Off No link exists.
3 Power supply 2 LED
Green solid Normal
Off One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit.
4 Power supply 1 LED
Green solid Normal
Off One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit.
128 More information
To Next Page
Loading...
