Figure 111: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server front view
Table 40: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
front view
LED function Status State
1
UID button/
LED*
Blue solid Activated
Blue flashing 1 Hz = Remote management or firmware upgrade in progress
4 Hz = iLO manual reboot sequence initiated
8 Hz = iLO manual reboot sequence in progress
Off = Deactivated
2
Power on/
Standby
button and
power LED*
Green solid System on
Green flashing Performing power on sequence
Amber solid System in standby
Off No power present
Facility power is not present, power cord is not attached, no power
supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
3
Health LED* Green solid Normal
Green flashing iLO is rebooting
Amber flashing System degraded
Table Continued
More information 129
To Next Page
Loading...
