LED function Status Port state
Off Not connected
2 Link Status Green solid Normal/Connected – link up
Green flashing Link down or not connected
Two-Port 10 Gb iSCSI/FCoE CNA Host PCIe Adapter LEDs
This information applies only to the HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter
for the HPE 3PAR StoreServ 8000 Storage system.
IMPORTANT: For the HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter, some
of the adapters have the faceplate labeling reversed, with the port on the left identified as port 2,
when oriented as in the following illustration. This illustration shows the corrected label with port 1
on the left.
Figure 88: HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter LEDs
Table 16: HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter
LEDs
LED function Status Port state
1
Link status Green solid Normal/Connected – link up
Off Link down or not connected
2
Activity Green solid Activity
Off No activity
Two-Port 10 GbE NIC Host PCIe Adapter LEDs
This information applies only to the HPE 3PAR Two-Port 10Gb Ethernet NIC Adapter for the HPE 3PAR
StoreServ 8000 Storage system.
IMPORTANT: For the HPE 3PAR Two-Port 10Gb Ethernet NIC Adapter, some of the adapters have
the faceplate labeling reversed, with the port on the left identified as port 2, when oriented as in the
following illustration. This illustration shows the corrected label with port 1 on the left.
110 More information
To Next Page
Loading...
