Figure 109: Physical service processor LEDs, HPE ProLiant DL120 Gen9 Server front view
Table 38: Physical service processor LEDs, HPE ProLiant DL120 Gen9 Server
front view
LED/Port function Status State
1
Power on/Standby button Green solid Service processor on
Green flashing Performing power-on sequence
Amber solid Service processor in standby, power still on
Off Power cord not attached, no power supplies
installed, or power failure
2
Health Green solid Service processor on and health normal
Amber flashing Service processor health degraded
Red flashing Service processor health critical
Off Service processor power off
3
NIC status Green solid Link to network
Green flashing Network activity
Off No network link/activity
4
UID/Service Blue solid Active
Blue flashing Either remote management, firmware upgrade
in progress, or iLO manual reboot sequence
initiated
More information 127
To Next Page
Loading...
