HPE JH323A

To Next Page

To Previous Page

• The power cords are correctly connected.

• All the interface cables are cabled indoors. If any cable is routed outdoors, verify that the socket

strip with lightning protection and lightning arresters for network ports have been correctly

connected.

Main Page

Table of Contents3
Preparing for Installation5
Safety Recommendations5
Examining the Installation Site6
Temperature/Humidity6
Cleanliness6
Emi7
Laser Safety7
Installation Tools7
Installation Accessories8
Installing the Switch10
Installing the Switch in a 19-Inch Rack11
Installation Methods11
Mounting Bracket Kits12
Rack-Mounting by Using Front Mounting Brackets12
Rack-Mounting by Using Front and Rear Mounting Brackets16
5130 48G Poe+ 4SFP+ 1-Slot HI)16
Mounting the Switch on a Workbench19
Grounding the Switch19
Grounding the Switch with a Grounding Strip19
Grounding the Switch with a Grounding Conductor Buried in the Earth Ground21
Grounding the Switch by Using the AC Power Cord22
Installing/Removing a Power Supply22
Installing a PSR150(JD362A, JD362B, JD366A, or JD366B) Power Supply23
Removing a PSR150(JD362A, JD362B, JD366A, or JD366B) Power Supply24
Installing a PSR720-56A/PSR1110-56A (JG544A/JG545A) Power Supply24
Removing a PSR720-56A/PSR1110-56A (JG544A/JG545A) Power Supply26
Connecting the Power Cord26
Connecting a PSR150-D/PSR150-D1 (JD366A/JD366B) Power Supply27
Connecting a PSR720-56A (JG544A)/PSR1110-56A (JG545A)/PSR150-A (JD362A)/PSR150-A127
(JD362B) Power Supply28
Installing/Removing an Interface Card28
Installing an Interface Card29
Removing an Interface Card30
Verifying the Installation30
Accessing the Switch for the First Time32
Setting up the Configuration Environment32
Connecting the Console Cable32
Connecting the Mini USB Console Cable33
Setting Terminal Parameters35
Powering on the Switch35
Setting up an IRF Fabric37
IRF Fabric Setup Flowchart37
Planning IRF Fabric Setup38
Planning IRF Fabric Size and the Installation Site38
Identifying the Master Switch and Planning IRF Member Ids38
Planning IRF Topology and Connections38
Identifying Physical IRF Ports on the Member Switches39
Planning the Cabling Scheme40
Configuring Basic IRF Settings42
Connecting the Physical IRF Ports42
Verifying the IRF Fabric Setup43
Maintenance and Troubleshooting44
Power Supply Failure44
Symptom44
Solution44
Fan Tray Failure44
Removing a Fan Tray45
Installing a Fan Tray45
Configuration Terminal Display Problems46
No Display46
Garbled Display47
Appendix A Chassis Views and Technical Specifications48
Chassis Views48
HPE 5130 24G 4SFP+ 1-Slot HI48
HPE 5130 24G Poe+ 4SFP+ 1-Slot HI49
HPE 5130 48G 4SFP+ 1-Slot HI50
HPE 5130 48G Poe+ 4SFP+ 1-Slot HI51
Technical Specifications52
Appendix B Frus and Compatibility Matrixes55
Frus and Compatibility Matrixes55
Hot Swappable Power Supplies55
Hot Swappable Interface Cards56
Appendix C Ports and Leds58
Ports58
Console Port58
Management Ethernet Port58
USB Port58
10/100/1000Base-T Autosensing Ethernet Port59
SFP+ Port59
Leds62
System Status LED62
Power Supply Status LED62
LED for the Port LED Mode (MODE)63
10/100/1000Base-T Autosensing Ethernet Port LED63
SFP+ Port LED64
Management Ethernet Port Leds64
Interface Card Status LED64
Fan Tray Status LED on the Fan Tray65
Port Status LED on the Interface Card65
Input Status LED and Output Status LED on the Power Supply65
Appendix D Cooling System66
Document Conventions and Icons67
Conventions67
Network Topology Icons68
Support and Other Resources69
Accessing Hewlett Packard Enterprise Support69
Accessing Updates69
Websites70
Customer Self Repair70
Remote Support70
Documentation Feedback70
Index72

Table of Contents

Related product manuals