HPE JH323A

48
Technical specifications
Table 11 Technical specifications for non-PoE switch models
Item HPE 5130 24G 4SFP+ 1-slot HI HPE 5130 48G 4SFP+ 1-slot HI
Dimensions (H × W ×
D)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
Weight
≤
7.5 kg (16.53 lb)
≤
7.5 kg (16.53 lb)
Console ports
• 1 × Mini USB console port
• 1 × serial console port
Only the Mini USB console port takes effect when you connect both ports.
USB ports 1 1
Management
Ethernet ports
1 1
SFP+ ports 4 4
10/100/1000Base-T
autosensing Ethernet
ports
24 48
Expansion interface
card slots
1, on the rear panel 1, on the rear panel
Power supply slots 2, on the rear panel 2, on the rear panel
Fan tray 2, on the rear panel 2, on the rear panel
Input voltage
• AC-input
{ Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
{ Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
• DC-input
{ Rated voltage range: –48 VDC to –60 VDC
{ Max voltage range: –36 VDC to –72 VDC
NOTE:
You can use the site –48 VDC power source or an RPS800-A or RPS1600-A RPS
as the DC power source.
Minimum power
consumption
• Single AC input: 37 W
• Dual AC inputs: 42 W
• Single DC input: 43 W
• Dual DC inputs: 49 W
• Single AC input: 45 W
• Dual AC inputs: 48 W
• Single DC input: 50 W
• Dual DC inputs: 54 W
Maximum power
consumption
• Single AC input: 72 W
• Dual AC inputs: 75 W
• Single DC input: 77 W
• Dual DC inputs: 80 W
• Single AC input: 83 W
• Dual AC inputs: 84 W
• Single DC input: 88 W
• Dual DC inputs: 93 W
Chassis leakage
current compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943
Melting current of
power supply fuse
• AC-input: 5 A, 250V
• DC-input: 8 A, 250V
• AC-input: 5 A, 250V
• DC-input: 8 A, 250V
Operating
temperature
0°C to 45°C (32°F to 113°F)
Relative humidity 5% to 95%, noncondensing