HPE JH323A

58
NOTE:
• The fixed SFP+ ports on the switch do not support the HPE X130 10G SFP+ LC LRM
Transceiver, HPE X130 10G SFP+ LC LH 80km Transceiver, and HPE X130 10G SFP+ LC ER
40km Transceiver.
• To guarantee the functionality of the SFP+ ports, use only HPE SFP/SFP+ transceiver modules
and SFP+ DAC cables.
• The SFP/SFP+ transceiver modules and SFP+ DAC cables available for the switch are subject to
change over time. For the most up-to-date list of SFP/SFP+ transceiver modules and SFP+ DAC
cables, consult your HPE sales representative or technical support engineer.
• For the specifications for the HPE SFP/SFP+ transceiver modules and SFP+ DAC cables, see
HPE Comware-Based Devices Transceiver Modules User Guide.
LEDs
System status LED
The system status LED shows the operating state of the switch.
Table 19 System status LED description
LED mark Status Description
SYS
Steady green The switch is operating correctly.
Flashing green (1 Hz) The switch is performing power-on self test (POST).
Steady red The switch has failed the POST or is faulty.
Flashing yellow (1 Hz) Some ports have failed to pass POST or are faulty.
Off The switch is powered off.
Power supply status LED
The switch provides two power supply slots at the rear. For each power supply, these switches
provide a power supply status LED on the front panel.
Table 20 Power supply status LED description
LED mark Status Description
PWR1
Steady green
A power supply is installed in power supply slot 1, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in power supply slot 1, but the power
supply has failed or no power is input to the power supply.
Off No power supply is installed in power supply slot 1.
PWR2
Steady green
A power supply is installed in power supply slot 2, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in power supply slot 2, but the power
supply has failed or no power is input to the power supply.
Off No power supply is installed in power supply slot 2.