HPE JH323A

51
Appendix B FRUs and compatibility
matrixes
FRUs and compatibility matrixes
FRUs
HPE 5130 24G 4SFP+ 1-slot HI
HPE 5130 48G 4SFP+ 1-slot HI
HPE 5130 24G PoE+ 4SFP+ 1-slot
HI
HPE 5130 48G PoE+ 4SFP+ 1-slot
HI
Hot swappable power supplies
PSR150-A/PSR150-
A1 (JD362A/JD362B)
Supported N/A
PSR150-D/PSR150-
D1(JD366A/JD366B)
Supported N/A
PSR720-56A
(JG544A)
N/A Supported
PSR1110-56A
(JG545A)
N/A Supported
Interface cards
LSWM2SP2PM Supported Supported
LSWM2XGT2PM Supported Supported
The PSR720-56A (JG544A), PSR1110-56A (JG545A), PSR150-A/PSR150-A1 (JD362A/JD362B),
and PSR150-D/PSR150-D1 (JD366A/JD366B) power supplies support asset management. You can
use the display device manuinfo command to view the name, sequence number, and vendor of the
power supplies you have installed on the device.
You can install one power supply, or two power supplies for redundancy on the HPE 5130 24G
4SFP+ 1-slot HI and HPE 5130 48G 4SFP+ 1-slot HI switches. These switches support mix of an AC
power supply and a DC power supply.
You can install one power supply, or two power supplies for redundancy on the HPE 5130 24G PoE+
4SFP+ 1-slot HI and HPE 5130 48G PoE+ 4SFP+ 1-slot HI switches. The PoE capabilities of these
switches vary by power supply configuration. For more information, see Table 12.
Hot swappable power supplies
The switch supports hot swapping of power supplies. The following table describes power supplies
available for the switch.
Power supply Specifications Reference
PSR150-A/PSR150-A1
(JD362A/JD362B)
• Rated input voltage range: 100 VAC
to 240 VAC @ 50 Hz or 60 Hz
• Max input voltage range: 90 VAC to
264 VAC @ 47 Hz to 63 Hz
• Max output power: 150 W
HPE PSR150-A & PSR150-D
Power Supplies User Guide