HPE JH323A

55
10/100/1000Base-T autosensing Ethernet port
Table 15 10/100/1000Base-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes
• 10 Mbps, full duplex
• 100 Mbps, full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission
distance
100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect SFP+ ports over a long
distance, use SFP/SFP+ transceiver modules and fibers. To connect SFP+ ports over a short
distance, use SFP/SFP+ cables. You can install the 1000 Mbps SFP transceiver module in Table 16,
1000 Mb
ps SFP cables in Table 17,10
Gbps SFP+ transceiver modules in Table 17, and 10 Gbps
SFP+ cables in Table 18 in
the SFP+ ports.
Table 16 1000 Mbps SFP transceiver modules available for the SFP+ ports
Produc
t code
HPE
descriptio
n
Central
wavelengt
h (nm)
Connecto
r
Cable/fiber
diameter
(µm)
Modal
bandwidth
(MHz × km)
Max
transmissio
n distance
JD118B
HPE X120
1G SFP LC
SX
Transceiver
850 LC
Multi-mode,
50/125
500
550 m
(1804.46 ft)
400
500 m
(1640.42 ft)
Multi-mode,
62.5/125
200
275 m (902.23
ft)
160
220 m (721.78
ft)
JD119B
HPE X120
1G SFP LC
LX
Transceiver
1310 LC
Single-mode,
9/125
N/A
10 km (6.21
miles)
Multi-mode,
50/125
500 or 400
550 m
(1804.46 ft)
Multi-mode,
62.5/125
500
550 m
(1804.46 ft)
JD061A
HPE X125
1G SFP LC
LH40
1310nm
Transceiver
1310 LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
JD062A
HPE X120
1G SFP LC
1550 LC
Single-mode,
9/125
N/A
40 km (24.86
miles)