c. Position the heatsink on top of the processor, ensuring that it is properly seated before securing the screws.
d. Tighten one pair of diagonally opposite screws halfway, then tighten the other pair of screws.
e. Finish the installation by completely tightening the screws in the same sequence.
3. Close the chassis .
4. Install the front bezel.
5. Install the chassis cover.
6. If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
7. Connect all peripheral cables to the server.
8. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clamp.
9. Connect the power cord to the AC source.
10. Power up the server.
ResultsResults
The procedure is complete.
Processor replacementProcessor replacement
SubtopicsSubtopics
Processor cautionsProcessor cautions
Removing the processorRemoving the processor
Installing the processorInstalling the processor
Reconfiguring the system date and time settingsReconfiguring the system date and time settings
To Next Page
Loading...
