HPE ProLiant ML150 Gen9

Component identification 7
Front panel LEDs and buttons
Item
Description
Status
1
Health LED
Solid green = Normal
1
Flashing green (1 flash per second) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 flash per second) = System critical
2
NIC status LED
Solid green = Link to network
Flashing green (1 flash per second) = Network active
Off = No network activity
3
Power On/Standby button
and system power LED
Solid green = System on
Flashing green (1 flash per second) = Performing power on sequence
Solid amber = System in standby
Off = No power present
2
1
To identify components in a degraded or critical state, review the system IML or use iLO to review the system health
status.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.