HPE StoreOnce 3640

HPE StoreOnce 5200 System
HPE StoreOnce 5200 System
Base system components
• A server (containing operating system disks only)
• One 2U storage enclosure with two IO modules and twelve 4 TB preconfigured disks.
Capacity upgrade options
BB964A: HPE StoreOnce 5200 48 TB Capacity Upgrade Kit
One 2U storage enclosure containing two IO modules and twelve 4 TB preconfigured disks. You can add
up to five enclosures to the base system for a maximum configuration of six enclosures on the system.
Optional hardware
Four PCIe slots are available optional hardware.
• BB984A: StoreOnce 10GbE-T 2-port Ethernet card
• BB982A: StoreOnce 10/25Gb SFP 2-port Ethernet card
• BB986A: StoreOnce 16Gb Fibre Channel 2-port card
• BB990A: StoreOnce 32 Gb Fibre Channel 2-port card
HPE StoreOnce 5200 System installation process overview
Procedure
1. Prepare the rack.
2. Verify system handling requirements.
3. Install the StoreOnce 5200 base system.
4. Install the capacity upgrade enclosures, if any.
Capacity upgrade enclosures can be installed before or after configuring the newly installed system.
5. Configure the newly installed system.
Preparing the rack for the StoreOnce 5200 System
Procedure
1. Ensure that there is space in the rack for the server, base storage enclosure, and any additional
capacity upgrade storage enclosures.
HPE StoreOnce 5200 System 37