Item Description
1 Server node.
2 JBOD 1: First capacity upgrade kit.
3 JBOD 2: Second capacity upgrade kit.
Item SAS cable Label color Cable from To
4 New 0.5 m cable Red JBOD 1 IOM 1 Port 2 JBOD 2 IOM 1 Port 1
4. Continue to Adding power cables.
Adding power cables and powering on the system
Procedure
1. Use the supplied power cables to connect the StoreOnce server to the mains power supply.
2. Use the supplied power cables to connect the capacity upgrade enclosure to the mains power supply.
IMPORTANT: Ensure that each power supply is connected to a separate PDU.
HPE StoreOnce 5200 48 TB Capacity Upgrade Kit
Introduction
The HPE StoreOnce 5200 System consists of a server node (containing operating system disks only) and
one storage enclosure with preconfigured storage on twelve 4 TB hard disks. Use the following to expand
the system storage.
BB964A: HPE StoreOnce 5200 48 TB Capacity Upgrade Kit
The capacity upgrade kit is a storage enclosure containing twelve 4 TB disks. It includes a hot spare disk.
Up to five capacity upgrade kits can be added to the StoreOnce 5200 System for a maximum of six
enclosures. A license is required for each capacity upgrade kit. A license entitlement certificate, which
describes how to obtain the License To Use, is included with the kit.
NOTE: The StoreOnce 5200 48 TB Capacity Upgrade Kit requires StoreOnce software version 4.1.0 or
higher and may only be used with the HPE StoreOnce 5200 System.
Capacity upgrade kit contents
• 2U storage enclosure containing two integrated SAS IO modules and twelve 4 TB disks
• Rail kit
• Two 0.5 m SAS cables
• One 1 m SAS cable
• One 2 m SAS cable
• Two power cords
Installing capacity upgrade kits 83
To Next Page
Loading...
