HPE StoreOnce 3640

Figure 23: Replacing the front bezel
Figure 24: Installing the locking device
Completing the capacity upgrade
After all the capacity upgrade disks and enclosures have been installed, log on to the StoreOnce
Management Console as an administrator. Apply capacity licenses and then scan and configure the new
storage.
HPE StoreOnce 3640 48 TB Capacity Upgrade Kit
Introduction
The HPE StoreOnce 3640 System consists of a server with preconfigured storage on twelve 4 TB hard
disks. Use the following to expand your storage.
BB962A: HPE StoreOnce 3640 48 TB Capacity Upgrade Kit
74 Installing capacity upgrade kits