HPE StoreOnce 3640

• Storage enclosures must be connected to the same server they were manufactured with.
• Cables must be connected to the same server and/or storage enclosure they were manufactured with.
• Hard disks are preconfigured and must remain installed or returned to the same disk slots they arrived
in.
You can remove the hard disks to make the enclosures lighter and easier to install. All hard disks must
be returned to their original slots before the system is powered on. Failure to return each disk to its
proper location will result in the system failing to start.
Label the disks with the provided label kits before removing them from the enclosure for ease of
installation and maintenance.
TIP: If an HPE StoreOnce 3620, 3640, 5200, 5250, or 5650 system does not start up correctly after
installation, the problem is probably with the way it was installed. Check the installation first before
attempting to debug the system.
StoreOnce Management Console supported browsers
For the most current compatibility information including browser versions, see the HPE StoreOnce
Support Matrix.
• Internet Explorer
• Mozilla Firefox
• Google Chrome
Overview 7